Question 1

Use of the half auxiliary is very common because it saves time.

Accepted Answer

A) True 
 B)False

Question 2

An auxiliary view is a projection that is parallel to an inclined surface.

Accepted Answer

A) True 
 B)False

Question 3

A reference line is placed in the center of a circle for the auxiliary view of a pipe.

Accepted Answer

A) True 
 B)False  False

Question 4

A primary auxiliary view is inclined to at least two of the three principal planes of projection.

Accepted Answer

A) True 
 B)False

Question 5

Which of the following is not true regarding an auxiliary sectional view?

Accepted Answer

A)  it is an auxiliary view in sections.
B)  It is drawn exactly as is any removed section view.
C)   Generally, only the surface cut by the cutting-plane line is drawn.
D)   Not all of the auxiliary view rules apply.E) B) and D)
F) B) and C)

Question 6

Lines that are not true length in the auxiliary should be:

Accepted Answer

A)  drawn lighter
B)  omitted
C)   drawn as a hidden line
D)   not altered at allE) C) and D)
F) A) and B)

Question 7

The line of sight for an auxiliary view drawing is located ____ to the edge view of the inclined surface.

Accepted Answer

A)  parallel
B)  perpendicular
C)   inclined
D)   foreshortenedE) All of the above
F) A) and B)

Question 8

Which of the following is not true regarding a secondary auxiliary view?

Accepted Answer

A)  It is projected directly from the primary auxiliary view.
B)  Many times the secondary auxiliary view is completed first.
C)   A secondary auxiliary view is always created.
D)   none of the aboveE) B) and D)
F) B) and C) C

Question 9

A partial auxiliary view makes it possible to eliminate one or more of the regular views.

Accepted Answer

A) True 
 B)False

Question 10

A fold line is place in the middle of two adjacent views.

Accepted Answer

A) True 
 B)False

Question 11

A primary auxiliary view must be drawn before a secondary auxiliary view can be drawn.

Accepted Answer

A) True 
 B)False

Question 12

Which of the following is not a major kind of auxiliary view?

Accepted Answer

A)  front view
B)  top view
C)   side view
D)   bottom viewE) B) and C)
F) C) and D)

Question 13

A pipe cut at a 45-degree angle will appear as a circle in the auxiliary view.

Accepted Answer

A) True 
 B)False

Question 14

A round surface is divided into twelve points and labeled in a clockwise direction.

Accepted Answer

A) True 
 B)False  True

Question 15

A primary auxiliary view is parallel to one of the principal planes of projection.

Accepted Answer

A) True 
 B)False

Question 16

When laying out a drawing with an auxiliary view, always choose the view with the most detail as the front view.

Accepted Answer

A) True 
 B)False

Question 17

It is necessary to draw a secondary auxiliary view when:

Accepted Answer

A)  the primary auxiliary view does not have enough detail
B)  the primary auxiliary view contains oblique surfaces
C)   the primary auxiliary view is not true shape
D)   all of the aboveE) A) and D)
F) A) and C)

Question 18

When drawing an auxiliary view, projection lines must be drawn at what angle from the inclined surface?

Accepted Answer

A)  60 degrees
B)  45 degrees
C)   90 degrees
D)   none of the aboveE) A) and B)
F) All of the above

Question 19

A reference line should be drawn horizontally and pass through as many points as possible.

Accepted Answer

A) True 
 B)False

Question 20

A surface shown true size and shape in an auxiliary view would be ____ on the principal view.

Accepted Answer

A)  Length
B)  foreshortened
C)   normal
D)   true shapeE) None of the above
F) A) and D)

Exam 9: Auxiliary Views

Use of the half auxiliary is very common because it saves time.

Correct AnswerverifiedShow Answer

An auxiliary view is a projection that is parallel to an inclined surface.

Correct AnswerverifiedShow Answer

A reference line is placed in the center of a circle for the auxiliary view of a pipe.

Correct AnswerverifiedFalse

A primary auxiliary view is inclined to at least two of the three principal planes of projection.

Correct AnswerverifiedShow Answer

Which of the following is not true regarding an auxiliary sectional view?

Correct AnswerverifiedShow Answer

Lines that are not true length in the auxiliary should be:

Correct AnswerverifiedShow Answer

The line of sight for an auxiliary view drawing is located ____ to the edge view of the inclined surface.

Correct AnswerverifiedShow Answer

Which of the following is not true regarding a secondary auxiliary view?

Correct AnswerverifiedC

A partial auxiliary view makes it possible to eliminate one or more of the regular views.

Correct AnswerverifiedShow Answer

A fold line is place in the middle of two adjacent views.

Correct AnswerverifiedShow Answer

A primary auxiliary view must be drawn before a secondary auxiliary view can be drawn.

Correct AnswerverifiedShow Answer

Which of the following is not a major kind of auxiliary view?

Correct AnswerverifiedShow Answer

A pipe cut at a 45-degree angle will appear as a circle in the auxiliary view.

Correct AnswerverifiedShow Answer

A round surface is divided into twelve points and labeled in a clockwise direction.

Correct AnswerverifiedTrue

A primary auxiliary view is parallel to one of the principal planes of projection.

Correct AnswerverifiedShow Answer

When laying out a drawing with an auxiliary view, always choose the view with the most detail as the front view.

Correct AnswerverifiedShow Answer

It is necessary to draw a secondary auxiliary view when:

Correct AnswerverifiedShow Answer

When drawing an auxiliary view, projection lines must be drawn at what angle from the inclined surface?

Correct AnswerverifiedShow Answer

A reference line should be drawn horizontally and pass through as many points as possible.

Correct AnswerverifiedShow Answer

A surface shown true size and shape in an auxiliary view would be ____ on the principal view.

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
False

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
C

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
True

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified